|
||||||
If your average medieval bod wanted to go down into a dungeon, it wouldn’t be using a lift (elevator in some parts.) I thought I’d have a go at making a set of spiral steps. I decided to put it on a 4 inch by 4 inch base and allow it to be accessed by […] 
The temple floorplan is printed and stuck to boards. They have a few wrinkles because I stuck them down with very thinly spread PVA. Spray mount would have been much better, but it’s excruciatingly expensive. Still the end result is pretty good. Everything in the photo below is flat except for the three models.
I’ve completed the floor plan for the temple in the Inquisitor Cynole game. It’s 2ft by 4ft. I collaged it up in Photoshop using textures mostly Googled up. The next step is to print it out and stick it to 30cm hardboard squares, as I did last year for the Chainsaw Warrior game. Here’s a […] 
Started work on some corridors, so that when I get more than 1 room, I can link them. The more perceptive of you will see that I started making the corridors 10 cm high, to match with the rooms, but I then decided to make them 8cm high, so cut them back part way through. […] 
Most forces in the game are being supplied by the players themselves. The only major player controlled force I’m supplying are these feral world natives. I thought about these for a long time before buying the models. The temple itself has an Aztec vibe, so initially I thought along those lines, but it seemed a […] For a future project, I’ve ordered up a copy of ‘Secrets of Shandisholm’ which has just been released by Oakbound as part of their “The Woods” range. I’ll be picking up a copy direct from Geoff at BOYL in a month’s time. It’s set in the world of Celtic myth – with plenty of really […] |
Warfactory range available from Lancer Miniatures |
|||||
|
Copyright © 2024 WarFactory - All Rights Reserved Powered by WordPress & Atahualpa |
||||||
